About 50 results
Open links in new tab
  1. Uniform flow occurs when | Civil4M

    Jan 21, 2018 · Uniform flow occurs when (a) the flow is steady (b) the flow is streamline (c) size and shape of the cross section in a particular length remain constant (d) size and cross section change …

  2. Why we do PCC before footings? - Civil4M

    Dec 11, 2017 · In any construction project, after excavation, PCC is done before footing. Why we do PCC at the base of footing, PCC have lower strength than concrete and it is placed at base?

  3. AGGREGATE IMPACT TEST IS: 2386 (Part IV) - Civil4M

    Mar 29, 2018 · AGGREGATE IMPACT VALUE TEST IS: 2386 (Part IV) OBJECTIVE: To determine the impact value of the road aggregates. To assess their suitability in road construction on the basis of …

  4. Work Procedure Specifications for Internal and External ... - Civil4M

    Sep 16, 2017 · Wetting shall be uniform. To avoid cracks at the junction of concrete with masonry work, the plaster shall be reinforced at such junctions by fixing standard wire mesh (6 x 6 x 6/6) as directed …

  5. Deflection - A uniform rise in temperature on a portal frame ... - Civil4M

    Jan 17, 2018 · A uniform rise in temperature on a portal frame will cause - (a) No sway (b) May cause sway depending on the temperature (c) May cause sway depending on the relative properties of the …

  6. In Resource Leveling - Civil4M

    Jan 18, 2018 · In Resource Leveling - (a) Total duration Of Project is Reduced (b) Total duration Of Project is Increased (c) Uniform Demand of Resources is achieved (d) Cost of Project is Controlled. …

  7. Analysis of Concrete Slabs on Grade Spreadsheet | Civil4M

    Jan 16, 2019 · Analysis of Concrete Slabs on Grade Spreadsheet Analysis of concrete slabs on grade is a spreadsheet program written in MS-Excel for the purpose of analysis of concrete slabs on grade. …

  8. How can we calculate the pace rate for CTM in crushing value ... - Civil4M

    Aug 9, 2019 · Check your CTM loading unit, in most of the cases it is Kn/sec. do calculation to arrive at rate of loading required to apply load for 10 minutes with uniform loading.

  9. Technical Specifications for Granular Sub Base (GSB) - Civil4M

    Jan 27, 2018 · GRANULAR SUB-BASE SCOPE This work shall consist of laying and compacting well-graded material on prepared subgrade in accordance with the requirements of Specifications. The …

  10. Uniform flow occurs when | Civil4M

    Jan 21, 2018 · Uniform flow occurs when (a) the direction and magnitude of the velocity at all points are identical (b) the velocity of successive fluid pai-ticles, at any point, is the same at suc¬cessive …